Instrumentation Teko power supplies, meters, etc.

In addition to contactless switches, the company "Techo" creates accompanying and independent devices for equipment automation. These are time relays, pulse counters, tachometers, power supplies, testers, level alarms, power supplies with built-in relays and other devices.

Power supplies are designed to supply stabilized DC voltage to electronic devices and sensors in industry.

• BP. Catalog of power supplies

The interface unit is designed to power inductive, capacitive, reed contactless explosion-proof switches (sensors) with the type of explosion protection PO Ex ia ma I Ma X / 0Ex ia ma IIC T4/T6 Ga X and 1Ex ia ma IIC T4/T6 Gb X and to convert a low-current analog signal coming from the sensor into a relay signal to control the actuators of industrial automation.

• BC N.NAMUR Interface Blocks catalog

A time relay is a device that provides a certain sequence of operation of the elements of an electrical circuit. For example, when it is necessary to automatically perform some operation after a certain period of time, and not immediately after the control signal is given.

• RV. Time relay catalog

The pulse counter (SI) is designed for digital counting of objects or pulse units coming to the counter input from limit switches, buttons, contactless sensors and switching on of actuators after reaching the set value of the counting results.

• SI. Catalog of pulse counters

The relay module is designed to convert the electronic output of the photobarrier into a relay output for switching the load. The relay module can be used to convert the electronic output of 3-wire contactless DC switches (inductive, capacitive, optical, etc.) into a relay output.

• MR0-24. Passport for the relay conversion module

The SU1-R1SCH device is designed to create automation systems for technological processes related to the control and maintenance of a given level of liquid or bulk substances in various kinds of tanks, containers, containers, etc.

• SU1-R1SCH. Passport for the level indicator

The noria control device is designed to block the drive of the conveyor (noria) or conveyor and alarm: 1) when the conveyor belt is displaced above the established limits; 2) when the belt speed decreases (braking) beyond the established limit; 3) when the power supply of the noria control device is lost.

• UKN5-24. Passport for the noria control device

the device is used to control electromagnetic valves, contactors, magnetic starters and to protect them from accidents and overloads. With its help, you can save up to 80% of electricity.

• BH I82P-3P-500-0s75-25-LP-C. Passport for the holding unit
• BH T-2S-250-10-40-TH-DH1. Passport for the holding unit

The UITS-3 three-phase network indication device is designed to indicate the presence of voltage in a three-phase AC network.

• WITS-3. Passport for the three-phase network indication device

Touch buttons are an excellent alternative to mechanical buttons. They do not wear out, do not break, do not clog, are made of hygienic materials (comply with sanitary and epidemiological standards and have a hygienic certificate) and are resistant to aggressive liquids used for disinfection.

• Kx-22XXXX-xxx-xx. Passport for touch buttons

The frequency control unit is designed to monitor the achievement of a threshold frequency value by an input frequency signal in the frequency range of 0.1... 2.5 Hz or 2... 50 Hz.

• CF1-1-G-E. Passport for the frequency control unit

The tachometer TH1 R3SCH is designed to count and display the number of events on the "counting input" per unit of time, as well as to issue a control signal when a preset frequency setting is reached. It is widely used in production automation systems, in engine speed control systems and various actuators.

• TH1 R3SCH. Passport for the tachometer

The task of this device is to automatically turn on the headlights of the car after starting the engine.

• BVHO. Technical specifications for the low beam switching unit

The signal converter is designed to simplify and facilitate your work! Having a contactless switch with any output signal, you can adapt it to a specific task without changing the connection scheme.

• SC1-1-G-E. Passport for the signal converter